Installation Notes

You Will Need To Drill Out The Original Rivet Head To Remove The Factory Door Pins And Bushes

Peening/Hammering The Bushes And Pins In Is Required – Simply Sliding Them Into Hinges Will Not Keep Them In Place

Please Grease The Pins Before Installation

After Installation, The Door May Be Tight To Open/Close, However Will Loosen As The Bushes And Pins Wear In



Fit For Holden HQ MONARO HJ HX HZ WB Front Door

Fit For Holden FE FB FC EK Rear Door



4 x Hinge Door Pins
8 x Brash Bushes

This product fits the below vehicles. Please check that your vehicle is in the list before purchasing:

Brand Machter Autoparts Online
Shipping Weight 0.1500kg
Shipping Width 0.130m
Shipping Height 0.020m
Shipping Length 0.090m
Shipping Cubic 0.000234000m3