Install
The Upgraded Rocker Arms To The Cylinder Heads Using The New Socket 
Head Cap Screws Supplied. Be Sure To Rotate The Trunion So That The 
Flat Recess Side Of The Trunion's Center Hole Faces Upward (The Socket 
Head Cap Screw Must Seat Against This Recessed Flat Side Of The Hole). 
Tighten The Cap Screw To a Value Of 22 Ft-Lbs, Following The Oe Installation Procedure.

 

Fitment

Fit For Intake And Exhaust Position on LS1, LS2, And LS6 Engines

Fit For Exhaust Position Only On L92, LS9, LS3 And L98 Engines


Package
16 x LS Series Rocker Arms
16 x Bolts For LS Trunnion Kit

This product fits the below vehicles. Please check that your vehicle is in the list before purchasing:

SKU RA-CV002
Brand MACHTER AUTOPARTS
Shipping Weight 3.0500kg
Shipping Width 0.155m
Shipping Height 0.075m
Shipping Length 0.185m
Shipping Cubic 0.002151000m3