Feature

Front High Strength Shock Spacer Kit: 
T6 Billet Aluminium Spacers

These Spacers Are 32mm Thick And Will Lift The Front Of Your Car Around 2"Inch-50mm.

T6 Billet Aluminium Is An Aircraft Grade Aluminium With High Strength And Light Weight Properties.

Built To Strict Oem Standards Specifications.

Come Same As Pictures.

Basic Hand Tools Are Required For Installation.

You Can Use These With Your Standard Suspension Or With Aftermarket Suspension To Help Level Out The Typical Nose Down Appearance That They Have.

Note: The Spacer Height And Lift Is Not A 1:1 Ratio - Meaning That The Lift Height Achieved Is Much Greater Than The Actual Thickness Of The Spacer. The Reason Is That The Lower Control Arm Compounds The Amount Of Lift Due To Its Angle And Length.

Rear Extended Shackle Kit:

Built To Strict Oem Standards Specifications.

Better Handling, Control And Comfortable Ride Both On And Off Road.

These Shackles Will Give You Approximately 2"Inch (47-50 Mm)Or Extra Lift Due To The Fact That You Are Raising Just One End Of The Spring.

With Shackles It Will Have a Much Smooth Ride On Or Offroad As The Shackles Are Able To Move With The Leaf Spring Giving A Much More Linear Stress Reduced Suspension Action.

Note

Installation Guide Or Manual Is NOT Included.

Professional Installation Is Recommended! 

Fitment

Fit For Mitsubishi Triton MN ML 2006-2015 4WD Models.

Package

2 x Front 32mm T6 Billet Aluminium Spacers

2 x Rear 2'' Lift Extended Greasable Shackles