25MM Strut Spacer & Rear Greasable Shackles Fit For Mitsubishi Triton MR 2" Lift Kit
Fit For Mitsubishi Triton MR 2" Lift Kit
Product Code: LIFKIT-MB001
Item Number:
LIFKIT-MB001
Suit:
Fit For Mitsubishi Triton MR 4WD Models Only
Feature:
Front High Strength Shock Spacer Kit:
T6 Billet Aluminium Spacers
These Spacers Are 25mm Thick And Will Lift The Front Of Your Car Around 2"Inch-50mm.
T6 Billet Aluminium Is An Aircraft Grade Aluminium With High Strength And Light Weight Properties.
Basic Hand Tools Are Required For Installation.
You Can Use These With Your Standard Suspension Or With Aftermarket Suspension To Help Level Out The Typical Nose Down Appearance That They Have.
Note: The Spacer Height And LIFT Is NOT A 1:1 Ratio - Meaning That The Lift Height Achieved Is Much Greater Than The Actual Thickness Of The Spacer. The Reason Is That The Lower Control Arm Compounds The Amount Of Lift Due To Its Angle And Length.
Rear Extended Shackle Kit:
Better Handling, Control And Comfortable Ride Both On And Off Road.
These Shackles Will Give You Approximately 2"Inch (47-50 Mm)Or Extra Lift Due To The Fact That You Are Raising Just One End Of The Spring.
With Shackles It Will Have A Much Smooth Ride On Or Offroad As The Shackles Are Able To Move With The Leaf Spring Giving A Much More Linear Stress Reduced Suspension Action.
Package:
2 X Front 25mm T6 Billet Aluminium Spacer
2 X Rear Extended Greasable Shackles
Note:
Installation Guide Or Manual Is Not Included.
Professional Installation Is Recommended!
This product fits the below vehicles. Please check that your vehicle is in the list before purchasing:
SKU | LIFKIT-MB001 |
Brand | Machter Autoparts Online |
Shipping Weight | 2.4500kg |
Shipping Width | 0.290m |
Shipping Height | 0.270m |
Shipping Length | 0.260m |
Shipping Cubic | 0.020358000m3 |