Come With Complete Set ( Left & Right )

Restyled The Appearance With A Higher Performance Lighting Output

Direct Replacement

Professional Installation Is Highly Recommended (No Instruction Included)

The Tail Lamps Have The Same Connections And Wires With The Original Cars. It Is Play And Plug. However, Some Of The Cars Are Sensitive We Recommend Buyer. To Install These Tail Lights By A Professional Installer

LEDS Will Stay Cool Situation And Longer Life Spam With None Color Fading



Taillight May Contain Condensation In First Time Use Or Direct Sun Exposure

No Worries, It Is Caused By The Accumulation Of Moisture Before Installation.

Following Few Steps Will Help:

Step 1 – Remove The Tail Light Assembly

Step 2 – Use A Hair Dryer  Or Sun to Dry The Tail Light

(!!! Remember Not To Point The Hair Dryer Directly On The Lens Of The Tail Light As Excess Heat May Warp The Lens And Cause Damage. Point The Hair Dryer On The Back Of The Tail Light As The Plastic Casing Is More Durable Against Excess Heat Than The Lens Itself.

Repeat The Procedure Until All Water And Condensation Have Been Evaporated. Heat The Tail Light For 5 Minutes And Rest For 2 Minutes Before Repeating The Above-stated Procedure.)

Step 3 – Attach Tail light Assembly To The Vehicle Body



For Ford Ranger PX1 PX2 PX3 T6 T7 T8 2012-ON

This product fits the below vehicles. Please check that your vehicle is in the list before purchasing:

Brand Machter Autoparts Online
Shipping Weight 6.0000kg
Shipping Width 0.230m
Shipping Height 0.510m
Shipping Length 0.480m
Shipping Cubic 0.056304000m3